LynnBlakeGolf Forums

LynnBlakeGolf Forums (http://www.lynnblakegolf.com/forum/index.php)
-   Drills, Training Aids and Equipment (http://www.lynnblakegolf.com/forum/forumdisplay.php?f=20)
-   -   Tongzilla request: Ben Doyles ultimate chipping test (http://www.lynnblakegolf.com/forum/showthread.php?t=1093)

metallion 06-12-2005 08:00 PM

Tongzilla request: Ben Doyles ultimate chipping test
 
Tongzilla asked me to tell more about "Ben Doyles ultimate chipping test", so here it is:

Ben asked me: What would be the ultimate chipping test?

He then had me do the following:

1. Insert a tee in the ground at an angle about 20 degrees to the ground, i.e. shallow angle. Insert it until 3/4-1 inch is still visible. The ballcup should be just above ground level. (see pic)



2. Make a chip shot hitting the tee with the leading edge of the clubhead. The tee should be jammed further into the ground (in its direction), more or less like hitting a nail with a hammer.

Passing the test requires a pretty precise (slightly downward) little shot. As Ben showed it to me he actually missed it once and was clearly quite shocked about that, saying: "Ooh. I never miss that".

Obviously this more or less requires a chipshot keeping the bottom of the clubhead parallell to the ground. In Destin I was taught a chip shot (that I liked a lot and since then practice) that builds on zeroing out all but the #1 accumulator. That way the leading edge will not be parallell to the ground and this test might not be appropriate.

If so I guess this "ultimate test" can be practiced on a chip-pitch or even a small pitch. Should be pretty hard for anyone.


All times are GMT -4. The time now is 10:09 AM.