I am ok with my backswing.My problem is on the downswing I am constantly hitting behind the ball. Any help is APPRECIATED
Head to Lowes or HomeDepot . . . get you a piece of plexiglass about 1/4 inch thick . . . you can cut it down to about the size of a book . . . stick it a couple of inches behind the ball start with it about 6 inches or so behind it. . . try to miss the plexiglass . . . you can start by not even having a ball there . . . just make practice swings . . . hit the ground and miss the glass . . . then introduce the ball. As you get better inche the glass closer to the ball.
If you got a video camera . . .film your swing and stick it up . . . could be a lot of cluprits mechanically . . . "hanging back" . . . right shoulder working too vertical . . . losing the right wrist bend . . . flipping . . . weight not left enough . . who knows . . . but the board will MAKE you do it . . . but ultimately you need to address the root cause.
Get a dowel or clubshaft and go to the top of your backswing . . . take the dowel/shaft in your left hand and stick it on your right shoulder vertical to the ground and make you right shoulder "mimick" that trajectory . . . note how that would shift your low point backwards . . . now put the shaft/dowel on an "incline" like a roof . . . note how your shoulder has to move down AND OUT . . . if your shoulder just works vertical it screws up your low point . . . if it works down OUT AND FORWARD you don't compromise low point . . so the shoulder has to work OUT TO THE BALL as well as down.
Note how much more forward Hogan's right shoulder is . . .
See how the shoulder works down and OUT TO THE BALL . .
__________________
Aloha Mr. Hand
Behold my hands; reach hither thy hand
Last edited by 12 piece bucket : 03-01-2011 at 10:28 AM.
do you by chance have a high resolution of the HOGAN photos you sent me.....would love to enlarge and frame for my office
thanks
Not really . . . you could boost a sequence from the videos though on youtube . . . . not sure how to improve the resolution . . .
But you can create the sequences by hitting "printscreen" and then pasting that into your "paint" program and clean up the stuff you don't want in there.
thanks bucket....let me give you my email.....so after you finish you can email it to me.....................very nice of you
Whoa! Do not - I repeat do not - give Bucket your email address.
In the meantime, there will be a group of four forum members from the "squad" that will be at your door 7PM tonight - do not question where we are going or what we will discuss - just be ready.
For members of the "squad" - do to a lack of time on this extraction - here's the code to read: