So zero #3 accumulator, although producing maximum clubhead speed, can produce erratic release rhythm, decrease clubhead lag pressure and therefore produce less consistant results?
Too much #3 accumulator will create an early release, and although having increased lag and rhythm control, will reduce clubhead speed?
If the above is correct, would the best compromise be small #3 accumulator angle when hitting and swinging?
When hitting, would a larger #3 accumulator be beneficial because of the angled hinging nature of the stroke? i.e smaller amount of clubhead travel at release can be increased by a larger angle?
1. Zero #3 Accumulator produces minimum Clubhead Speed; can and should be executed with perfect Rhythm; with any degree of Lag Pressure from light to heavy; and properly executed will produce consistent results. In other words, exactly the opposite of everything you said. But we're gettin' there!
2. An increased #3 Accumulator (from the Level condition of the Left Wrist) will require an earlier Release, but only slightly earlier. This can be offset with a higher Handspeed. All degrees of Accumulator #3 (from Zero to Maximum) should be executed with perfect Rhythm, i.e., the Hands and Club should move at the identical Angular Speed (RPM). This will happen when you keep your Left Wrist Flat through Impact.
3. Hitters and Swingers can use the same amount of #3 Accumulator Angle. Just grip the Club slightly under the heel pad of the Left Hand (not way down deep in the fingers) and you've got it.
But we're gettin' there! 
Threaded Mode
