LynnBlakeGolf Forums

LynnBlakeGolf Forums (http://www.lynnblakegolf.com/forum/index.php)
-   Scandinavian PGA (http://www.lynnblakegolf.com/forum/forumdisplay.php?f=35)
-   -   Hit a chosen dimple on the inside upper eighth of the ball (http://www.lynnblakegolf.com/forum/showthread.php?t=5813)

libero 01-19-2009 06:16 PM

Hi Burn,
at least you remember you had lunch...
Seriously,I see that spot there and would be interested to know who and why
put it there.

Burner 01-20-2009 06:22 PM

Quote:

Originally Posted by libero (Post 60368)
Hi Burn,
at least you remember you had lunch...
Seriously,I see that spot there and would be interested to know who and why
put it there.

L,

I had the .jpg filed amongst some of the Chuck Evans' stuff that I have squirreled away.

I think it came from deep within the forum he ran before Medicus but cannot be certain.

However, with a slightly open club face at impact, squaring through separation, the spot is indeed the inside aft quadrant and any further inside is just too much.

At least that was the consensus..........................as I recall.:)

Augusta Golf 01-23-2009 02:47 PM

Quote:

Originally Posted by Burner (Post 60439)
L,

I had the .jpg filed amongst some of the Chuck Evans' stuff that I have squirreled away.

I think it came from deep within the forum he ran before Medicus but cannot be certain.

However, with a slightly open club face at impact, squaring through separation, the spot is indeed the inside aft quadrant and any further inside is just too much.

At least that was the consensus..........................as I recall.:)

Mr. Burner is correct- one dimple inside of center :salut:

Burner 01-23-2009 07:13 PM

Quote:

Originally Posted by Augusta Golf (Post 60570)
Mr. Burner is correct- one dimple inside of center :salut:

But, only with whorezontal hinge action.:laughing9

Amen Corner 01-23-2009 07:25 PM

OK.....

I get it....you could not get your own section........:whistle: :dance:

But since you are now posting in the "Scandinavian section"......

One could suppose to read post here in either swedish/danish/norwegian.......

So I now ask you, as Libero did to translate,....

Could you, Libero/Burner/Augusta, please translate your posts to...swedish?:eyes: :) :laughing9

Burner 01-23-2009 08:01 PM

Quote:

Originally Posted by Amen Corner (Post 60588)
OK.....

I get it....you could not get your own section........:whistle: :dance:

But since you are now posting in the "Scandinavian section"......

One could suppose to read post here in either swedish/danish/norwegian.......

So I now ask you, as Libero did to translate,....

Could you, Libero/Burner/Augusta, please translate your posts to...swedish?:eyes: :) :laughing9

AC,

Will pidgin Norwegan do for you?

Jeg hadde det. jpg som ha blitt arkivert blant noe av Chucks Evanss stoffet at jeg har squirreled borte.

Jeg tror at det kom fra dyp innenfor forum han kjørte før Medicus men kan ikke være viss.

Men, med et litt åpent klubbansikt på støt er squaring gjennom separering, flekken virkelig innsiden akterut kvadrant og noe ytterligere innside er akkurat for mye.

Minst at var konsensusen. .........................as som jeg tilbakekaller.

Snill hensyn,

Brenner :salut:

Burner 01-23-2009 08:24 PM

I've been brushing up on my Swedish
 
JAG har den.jpg arkiverat bland något om den Kasta Evans' material så pass Jag har ekorre bort. JAG tänka den kom från djup inom den forum han löp framför Medicinsk utom kan icke bli säker. Hur... än , med en lätt öppen klubba möta på sammanstötning , kvadratur igenom separeringen , fläcken är verkligen den insida aft kvadranten och någon längre bort insida är rättvis alltför mycket. Det vill si så pass var den samstämmighet. så JAG kalla tillbaka.

Vänlig önskningen,

bränna:salut:

Augusta Golf 01-23-2009 11:13 PM

Quote:

Originally Posted by Amen Corner (Post 60588)
OK.....

I get it....you could not get your own section........:whistle: :dance:

But since you are now posting in the "Scandinavian section"......

One could suppose to read post here in either swedish/danish/norwegian.......

So I now ask you, as Libero did to translate,....

Could you, Libero/Burner/Augusta, please translate your posts to...swedish?:eyes: :) :laughing9

English is the best and only language you'll get from me:happy3:

Augusta Golf 01-23-2009 11:14 PM

Quote:

Originally Posted by Burner (Post 60585)
But, only with whorezontal hinge action.:laughing9

Just remember whorezontal is way past horizontal:salut:

libero 02-04-2009 01:32 PM

Amen,
now you're asking too much!
I could translate from English into another LANGUAGE,not Swedish!

Tanks Burn for the dimple explanation.If that is only applying to horizontal
hinge,than with angled what I do?


All times are GMT -4. The time now is 05:54 AM.