LynnBlakeGolf Forums

LynnBlakeGolf Forums (http://www.lynnblakegolf.com/forum/index.php)
-   Emergency Room - Hitters (http://www.lynnblakegolf.com/forum/forumdisplay.php?f=28)
-   -   These guys are hitters, right? (http://www.lynnblakegolf.com/forum/showthread.php?t=7278)

kamandi 05-12-2010 09:29 PM

Quote:

Originally Posted by O.B.Left (Post 72602)
Your sandwedge may be a slightly shorter swing, stopping at Top instead of End, a very good thing for a Drive Loader. Its a straight line from Top to the Aiming Point.

Yup, that's actually what I've been working on a lot lately, going from End to Top without losing my way. I'm gonna get there. :)

O.B.Left 05-13-2010 05:11 PM

Quote:

Originally Posted by kamandi (Post 72652)
Yup, that's actually what I've been working on a lot lately, going from End to Top without losing my way. I'm gonna get there. :)


Hey Kamandi

See 6-E-2 THE AIMING POINT CONCEPT. Its the Hands that we direct in a straight line at and through the Aiming Point.

Now I know your going to say, "straight line? What the...." but read point #1. Also, Thrust is always Straight Line by definition.

See also 10-23-A and compare it to 10-23-C where going to End requires a "retracing" of the Arc from Top to End prior to Thrusting. Notice too if you havent already the shadowy arrow that represents the Direction of Thrust towards the Aiming Point which is assumed to be the ball for simplicity. That arrow is easy to miss but its in all those photos. From Top it is Down and Out! Not Forward, not at all. No Sir.

This is the alternate procedure to Tracing the Straight Line Base Line with the #3 Pressure Point. Which has an element of Forward to it. If your missing some Down try the Aiming Point Procedure. One of my favourite sentences in the book is from GEOMETRY OF THE CIRCLE, 2-N-0 CLUBHEAD LINE OF FLIGHT: ".......Both the Lag Pressure Point and the Clubshaft must so relate to the selected Plane Line OR Angle of Approach -to the geometric or the visual-but don't try to Monitor both at the same time because, though equally dependable , they need not be identical in execution AS LONG AS THE CLUBSHAFT HOLDS A STRAIGHT LINE RELATIONSHIP TO A STRAIGHT LINE--POINTING AT A STRAIGHT LINE....." I like the part about them not needing to be identical in execution.........cause they sure dont seem identical to me.

(Me personally, I have my aiming point 2" ahead of the ball towards the target for a wedge shot and 2" my side of the ball for a driver..........its a way of managing the time required to make a longer shaft switch ends and works like a dream for the driver).


PS Read 8-6 THE TOP. "A static period of alignment and relationship corrections until the deliberate aiming of the #3pp....."

kamandi 05-13-2010 11:34 PM

Nice post, O.B. Left; I think I understand what you're getting at.

I guess my understanding of the term forward is wrong; I just assumed it meant the clubhead is always moving forward in the downswing ... up-in-back to down-out-forward up-in-forward -- whether in a hit or a swing type motion. I guess I don't really understand how the term forward is used in TGM.

On the straight line aim point concept, I do use that (ever since seeing Yoda's youtube vid on that), and like you, I aim more forward of the ball with the shorter irons, and I aim slightly behind the ball with the driver; I imagine a straight line from my hand to the golf ball. On hard-hardpan, I'll usually have the aim point at around the center of the ball or just a tad behind it, so that I get it more cleanly, plus it's easier on the hands/wrists.

I have experimented with tracing the shaft where you feel it more in pp#3; I use that more when I want to try to keep the ballflight lower, as I can keep a delofted angle easier through this.

What I'm trying to understand more right now is what you've described, from an initial shoulder throw to a right arm thrust. I find it's easier to feel pp#4 tugging naturally; when I try to add pp#2, it sometimes dominates the movement, and I lose feel/control of the all important pp#1 or even the pa#1 altogether.

In your shoulder throw hit, do you actively use/feel pp#2&3, just before pp#1 dominates, or is the use/feel of pp#2&3 very passive?

Thanks again, man. :)

brianmontgomery2000 09-06-2010 11:16 PM

Is Charlie Hoffman a hitter?

To my very untrained eye that motion looked "hitter"-like. He certainly has the build...

ColtsFan 09-07-2010 12:07 PM

yes, I would say so....he has a very short BS and finishes like a hitter w/ no full roll swivel.

Miller was commenting on his forearms and he really gives the ball a good "hit" ....something along those lines.

I trust Yoda or Lukes assesment more than Miller when it comes to classifying a person as hitter or swinger:laughing9

efnef 09-07-2010 10:34 PM

Quote:

Originally Posted by ColtsFan (Post 75646)
yes, I would say so....he has a very short BS and finishes like a hitter w/ no full roll swivel.

Miller was commenting on his forearms and he really gives the ball a good "hit" ....something along those lines.

I trust Yoda or Lukes assesment more than Miller when it comes to classifying a person as hitter or swinger:laughing9

Miller knows some TGM. He studied with Ben back in the day.

ColtsFan 09-08-2010 12:17 PM

Quote:

Originally Posted by efnef (Post 75663)
Miller knows some TGM. He studied with Ben back in the day.


cool, I didnt know that....

innercityteacher 09-15-2010 12:22 PM

Awesome, OB!
 
Quote:

Originally Posted by O.B.Left (Post 72693)
Hey Kamandi

See 6-E-2 THE AIMING POINT CONCEPT. Its the Hands that we direct in a straight line at and through the Aiming Point.

Now I know your going to say, "straight line? What the...." but read point #1. Also, Thrust is always Straight Line by definition.

See also 10-23-A and compare it to 10-23-C where going to End requires a "retracing" of the Arc from Top to End prior to Thrusting. Notice too if you havent already the shadowy arrow that represents the Direction of Thrust towards the Aiming Point which is assumed to be the ball for simplicity. That arrow is easy to miss but its in all those photos. From Top it is Down and Out! Not Forward, not at all. No Sir.

This is the alternate procedure to Tracing the Straight Line Base Line with the #3 Pressure Point. Which has an element of Forward to it. If your missing some Down try the Aiming Point Procedure. One of my favourite sentences in the book is from GEOMETRY OF THE CIRCLE, 2-N-0 CLUBHEAD LINE OF FLIGHT: ".......Both the Lag Pressure Point and the Clubshaft must so relate to the selected Plane Line OR Angle of Approach -to the geometric or the visual-but don't try to Monitor both at the same time because, though equally dependable , they need not be identical in execution AS LONG AS THE CLUBSHAFT HOLDS A STRAIGHT LINE RELATIONSHIP TO A STRAIGHT LINE--POINTING AT A STRAIGHT LINE....." I like the part about them not needing to be identical in execution.........cause they sure dont seem identical to me.

(Me personally, I have my aiming point 2" ahead of the ball towards the target for a wedge shot and 2" my side of the ball for a driver..........its a way of managing the time required to make a longer shaft switch ends and works like a dream for the driver).


PS Read 8-6 THE TOP. "A static period of alignment and relationship corrections until the deliberate aiming of the #3pp....."


Thanks! :)

nolimit569 09-21-2010 02:17 PM

I apologize if I am veering a bit of topic about this but does can anyone provide an explanation, and or show some still's as to why Boo Weekley's swing would be considered a hitters motion?


All times are GMT -4. The time now is 10:46 PM.