Homer's two gifts... and two pivot centers

[Yoda]

No Horizontal pins. I stated Horizontal Hinge Pin, Sketch 1-L is labeled Horizontal Hinge Pin...Now I am really confused, cause I went to 1-L and used the percise terms/words that are in the book.

So you are telling me that my label is incorrect? If so then my use of 1-L was totally misplaced...and .... I really need help here. The label on 1-L is rather clear to me...

I understand your confusion, Martee, and it gets worse...

In addition to the Horizontal Hinge Pin label you see on Sketch 1-L, you also see an Angled Hinge Pin. The labels are indeed clear, and they are seemingly in direct conflict with my post stating there are only vertical pins. What's going on here?

The key is in how you read the words:

HORIZONTAL HINGE pin...the (vertical) pin of the Horizontal Hinge. Not a HORIZONTAL hinge pin.

ANGLED HINGE pin. The (vertical) pin of the Angled Hinge. Not an ANGLED hinge pin.

[efnef]

I understand your confusion, Martee, and it gets worse...

In addition to the Horizontal Hinge Pin label you see on Sketch 1-L, you also see an Angled Hinge Pin. The labels are indeed clear, and they are seemingly in direct conflict with my post stating there are only vertical pins. What's going on here?

The key is in how you read the words:

HORIZONTAL HINGE pin...the (vertical) pin of the Horizontal Hinge. Not a HORIZONTAL hinge pin.

ANGLED HINGE pin. The (vertical) pin of the Angled Hinge. Not an ANGLED hinge pin.

To the thief on the cross:

I tell you today, you will be with me in paradise.

vs.

I tell you, today you will be with me in paradise.

[Martee]

I understand your confusion, Martee, and it gets worse...

In addition to the Horizontal Hinge Pin label you see on Sketch 1-L, you also see an Angled Hinge Pin. The labels are indeed clear, and they are seemingly in direct conflict with my post stating there are only vertical pins. What's going on here?

The key is in how you read the words:

HORIZONTAL HINGE pin...the (vertical) pin of the Horizontal Hinge. Not a HORIZONTAL hinge pin.

ANGLED HINGE pin. The (vertical) pin of the Angled Hinge. Not an ANGLED hinge pin.

Drawing updated, at least I understand what is being said, still think 1-L needs some work...

[Yoda]

That was some great stuff! Could we see the revised drawing with the YODA changes?

Better than that, RBG, we've put up some Ted Fort footage recently scrubbed by a proficient member and marked with his Stationary Head. http://www.lynnblakegolf.com/forum/s...8595#post18595

That would be Stationary Head.

As in...

STATIONARY HEAD.

The First Essential (2-0-A-1).