[12 piece bucket]

You lost me,,,

If the plane and target lines are parallel, how (or why) does one thrust across? Forgive me, but my nut just won't accept this idea,,,

CW

2-N-0 CLUBHEAD LINE OF FLIGHT The line of flight of the Clubhead and the Line of Flight of the ball are not the same but touch momentarily during Impact. The one has a vertical plane of action, the other an Inclined Plane. This involves the Angles of Approach (2-J-3) established by the Left-Shoulder-to-Ball relationship of the Lever Assemblies 1-L-11. This line cuts diagonally across the face of the Inclined Plane and passes through both the Impact Point and the Low Point. These points also locate parallel Plane Lines passing through them – that is, the Impact Plane Line and the Low Point Plane Line, each of which must use the “Sweet Spot” Plane (2-F). Herein, “Plane Line” means the Impact Plane Line and “Low Point” means Low Point Plane Line.

Normally, Delivery “THRUST” is “Cross Line” – Delivery “MOTION” is “On Line”. Even at Low Point, because Delivery Path Angle (direction) is ALWAYS the alternate Target Line (7-2-3) even with Circle Delivery Path (1-L-9, 1-L-10). Study 7-11 and 7-19.

If the Ball is back of Low Point then you must take the Lag all the way DOWN and OUT to low point. Remember clubhead lag has no release point so you continue driving DOWNPLANE until both arms straight. For the swinger CF is the DRIVE or Thrust.

Even using Tracing a Straight Plane Line you will see the clubhead move in an Arc . . . So from your vantage point you want to see the clubhead CROSS your Target Line to get Down and out to Low Point. Otherwise you could get the clubhead going toward the green resulting in Steering and its Bent Left Wrist.