I had my new set built -MOI matched from 3-PW ,(the sw ,gw are weighted differently). They just feel so good.
The other thing I found as a result of the fitting process were how far" out" the lofts,lies and swingweight were on my previous set.
Which of your old clubs did you use as your target club, the ones to which the others were matched?
Which of your old clubs did you use as your target club, the ones to which the others were matched?
Also why did you choose that club as the target?
Thanks
I used a 7 iron from my old set and a 5 iron from a previous set.The 7 iron was a cavity and the 5 iron was a blade-all Hogans.It was interesting to find that they were both the same swingweight and 6.4 and 6.5 flex respectively ,and -they were 2 of the 3 clubs in THE WHOLE SET that had the correct lofts and lies .
The 5 and 6 Irons in the cavity set were only 2 degrees apart in loft and the swingweights varied from d4 to d1!.
So to answer the question -I hit both clubs good.
But as part of the fitting process I hit a bunch of 7 and 5 irons with slightly different flex ,lies and checked every one on a launch monitor and my lie angle was tweaked a 1/2 a degree.Launch monitors and impact tape don't lie!
I would strongly urge EVERYONE to get custom fitted -even if it is just to get your existing clubs set up correctly.
Just a note for Information ,I see that Henry Griffits are now making sets with screw in ,interchangeable shafts -at last.This is not to be taken as a plug for any manufacturer - just a recommendation to get fitted
You can use club-connex to fit any shaft to any head, a really good system that opens up a whole load of fitting options, not limited to any one brand.
A full fitting is definately a good idea for all golfers, even just to confirm that what you have is right!
Do you believe your clubs were manufactured incorrectly or did they become that way through use?
Obviously,I can't prove they had not moved since they were made,it seems too much of a coincidence that the "standard "lie was consistently out throughout the set -and I have not messed with the swingweight or the shaft flex.so I believe they were ASSEMBLED incorrectly.